Lexmark All In One Printer W820 User Manual

Loading the multipurpose feeder

Printing

The multipurpose feeder holds approximately 35 sheets of 20 lb paper.

Note: You can load the multipurpose feeder with or without the duplex unit

Maintenance

attached to the printer.

1 Open the multipurpose feeder.

www.lexmark.com

Lexmark W820

Loading the multipurpose feeder

Printing

4 Orient the stack of print media correctly for the size, type, and print method you are

loading. Refer to the icons on the feeder.

Maintenance

Note: Do not exceed the maximum stack height indicated on the side guide.

Overfilling the feeder may cause paper jams.

Maximum stack height indicator label

and

Paper size icons

orientation

icons

www.lexmark.com

Lexmark W820

Loading the multipurpose feeder

Printing

5 Place the print media along the front side of the multipurpose feeder and push the

print media into the printer as far as it will go. Do not force the print media.

Maintenance

Lexmark W820

Loading the multipurpose feeder

Printing

6 Slide the side guide forward until it lightly touches the stack.

Maintenance

Note: Once you load print media into the multipurpose feeder, set the Paper

Size, Paper Type, and Paper Source from the operator panel or from your

software application.

When you are not using the multipurpose feeder, remove any print media from the

feeder, push the extension guide back in, and push the multipurpose feeder to the

closed position.

www.lexmark.com

Lexmark W820

Mitsubishi Motors Automobile Parts W5m42 User Manual
Panasonic Kx Tg5976al User Manual
Ricoh Aficio 3260c User Manual 2
Samsung Avmch128ca1 User Manual
Sanyo Stw0622c2 User Manual
Schumacher Se 40225 User Manual
Sharp Ar M160 User Manual
Trane 2ttx4 User Manual
Whirlpool Acg052xj0 User Manual
Whirlpool Acpe102ps2 User Manual